Hoisting Equipment & Bridge Cranes

“COMPLETE” ASEA 8’ DOUBLE DRUM MINE HOIST, HEADFRAME AND CAGE SKIP CONVEYANCE PACKAGE

“COMPLETE” ASEA 8’ DOUBLE DRUM MINE HOIST, HEADFRAME AND CAGE SKIP CONVEYANCE PACKAGE
Contact Us For Pricing

1 ONLY “COMPLETE – WORK READY” ASEA 8’ DOUBLE DRUM MINE HOIST, HEADFRAME AND CAGE SKIP CONVEYANCE PACKAGE
- Type: HTVD 2.54
- Serial No.: Available
- 2 x Drums @ 100" Diameter x 60" Wide Across Face
- Drums are Machined Grooved
- 1.25” Diameter Hoist Ropes 6 x 27 @ 176,873 Lbs. Breaking Strength
- Approx. 3400’ of Hoist Rope on Each Drum
- Geared Mechanical Clutches
- 23,625 Lbs. Suspended Load Rating
- 1,560 Feet Per Minute Hoisting Speed
- 700 HP, 520 Volt DC Drive, 3 Phase, 60 HZ, 847 RPM, Hoist Motor
- Electric Motor Through Gear Reduction Drive System
- ASEA DC Thyristor Electrics
- PLC Digital-Mechanical Hoistman Controls
- Lilly Model "D" Overwind Underwind Speed Controls
- Harringbone Bull Gear with 262 Teeth, 12.5” Face
- 2 x Harringbone Pinions with 21 Teeth 12.5” Face Each
- 2500’ Shaft Depth (Current Distance)
- Dynamic Braking
- Pinion Safety Brake
- ASEA Electric 4160 Volt AC, 3 Phase, 60 Hz, Primary Electrical Switchgear
- ASEA 520 Volt DC, 3 Phase, 60 Hz, Motor Control Center
- All Related Valves and Hydraulic Controls
- All available diagrams, prints and manuals
Inspections: See details below.
This package is complete, intact and in good condition, ready to go to work upon new installation

ALSO AVAILABLE (AT THIS SITE):

2 ONLY “GOOD USED” CAGE OVER SKIP CONVEYANCES
- 10 Man Cage with All Related Safety Features
- 10 Ton Bottom Dump Skips
2 ONLY “GOOD USED” 8’ DIAMETER SHEAVE WHEELS
- Spoke Wheel Style Design
- SKF Pedestal Bearings
1 ONLY “COMPLETE” 110+/- FOOT HIGH PRE-ENGINEERED TIMBER WITH STEEL REINFORCED SUPPORT LEGS BOLTED HEADFRAME

Please contact us for pricing and further information.


globe