Open Pit Mining, Quarry & Construction Equipment

SANDVIK D25KS BLASTHOLE DRILL RIGS

SANDVIK D25KS BLASTHOLE DRILL RIGS
Contact Us For Pricing

3 ONLY “LOW HOUR REFURBISHED” SANDVIK D25KS BLASTHOLE DRILL RIGS
These D25KS Blasthole Drill Rigs were all Manufactured in the USA and are equipped with down-the-hole (DTH) hammer drills,
including high pressure air compressors, airline lubricators and fine feed controls. Commonly used in large
hard rock mining operations. These drills allow for easy transportation as the dismantling of these units are
not needed for transport and are often the drill of choice among many contractors.
Rig No. 1 Rig No. 2 Rig No. 3
Hours: 5301 Hours: 7962 Hours: 4061
YOM: 2015 YOM: 2012 YOM: 2012
D25KS GENERAL TECHNICAL SPECIFICATIONS:
- Enclosed FOPS Approved Operators Cab
- Thermal Insulation and Noise Reduction to 85 dBA
- Heat & Air Conditioning
- Shock Mounted Cab
- Fine Feed Controls
- Hole diameter 127 mm - 172 mm
- Drill Pipe: (5”- 6-3/4”),9,14 m (30’)
- Hole Depth: 27 m (88’)
- Single Pass Depth: 8.65 m (28.3’)
- Max Pulldown 124 kN (27 800 lb/force)
- Bit Load 143 kN (32 000 lb/force)
- Pipe loading Controlled from the Operator’s Cab
- Holding Wrench
− Hydraulic Pipe Loader Swing and Indexing
- Feed Rate 0-21 m/min (0-68 fpm)
- Hoist Rate 0-54 m/min (0-176 fpm)
- Rotation Speed 0-95 rpm
- Rotation Torque 8 282 Nm (73 300 in-lb)
- Undercarriage 325 class Excavator
- Operating Weight 33 566 kg (74 000 lb)
- 1 x C18 Caterpillar Engine, 2 x Cummins QSX15
- Tier III C18 and QSX15 Engines Rated at 354 - 470 kW (475 - 630 HP)
- Sullair Compressor 25,5 m³/min (1160 cfm) 24,1 Bar (350 psi)
- Full Advanced Group Fire Suppression (Foam and Powder) Dual System
- Lincoln Auto Greasing System.
- Additional E-Stops (emergency stop hand buttons)
SHIPPNG WEIGHTS & DIMENSIONS:
- Mast assembly length 13,72 m (45’ 0”)
- Mast assembly width 2,13 m (7’ 0”) with inside loader
- Mast assembly height 1,83 m (6’ 0”)
- Mast assembly weight 9 979 kg (22 000 lb)
- Base/frame length 8,64 m (28’ 4”)
- Base/frame width 3,91 m (12’ 10”)
- Base/frame height 3,78 m (12’ 5”)
- Base/frame weight (std) 23 587 kg (52 000 lb)
- All other features and details as per the attached Manufactures Specifications.
Fully Maintained & Repaired to OEM Specifications. Manufactured in the USA and come complete with all operating and maintenance manuals, spare parts, files etc.
Each drill rig has been put through the shop and completely refurbished including mast and main frame and are in ready to work condition.
Please contact us for pricing and further information.


globe