Open Pit Mining, Quarry & Construction Equipment

SANDVIK D25KS DTH BLASTHOLE DRILL RIG

SANDVIK D25KS DTH BLASTHOLE DRILL RIG
Contact Us For Pricing

1 ONLY “WORK READY” SANDVIK D25KS DTH BLASTHOLE DRILL RIG
This D25KS DTH Blasthole Drill Rig was Manufactured in the USA and equipped with a down-the-hole (DTH) hammer drill,
including high pressure (300 PSI) air compressor, airline lubricator and fine feed controls. Commonly used in large hard rock mining and quarry operations,
the D25KS Drill Rig allows for easy transportation as the dismantling of these units is not necessary for transport and are often the drill of choice among many contractors.
YEAR: 2008
FRAME HOURS: 15,026
HOURS SINCE MAJOR OVERHAUL: 500
D25KS GENERAL TECHNICAL SPECIFICATIONS:
- Enclosed FOPS Approved Operators Cab
- Thermal Insulation and Noise Reduction to 85 dBA
- Heat & Air Conditioning
- Shock Mounted Cab
- Fine Feed Controls
- Hole diameter 127 mm - 172 mm
- Drill Pipe: (5”- 6-3/4”),9,14 m (30’)
- Hole Depth: 27 m (88’)
- Single Pass Depth: 8.65 m (28.3’)
- Max Pulldown 124 kN (27 800 lb/force)
- Bit Load 143 kN (32 000 lb/force)
- Pipe loading Controlled from the Operator’s Cab
- Holding Wrench
− Hydraulic Pipe Loader Swing and Indexing
- Feed Rate 0-21 m/min (0-68 fpm)
- Hoist Rate 0-54 m/min (0-176 fpm)
- Rotation Speed 0-95 rpm
- Rotation Torque 8 282 Nm (73 300 in-lb)
- Undercarriage 325 class Excavator
- Operating Weight 33 566 kg (74 000 lb)
- Tier III C18 Caterpillar Engine, Rated at 354 - 470 kW (475 - 630 HP)
- Sullair Compressor 25,5 m³/min (1160 cfm) 24,1 Bar (350 psi)
- Full Advanced Group Fire Suppression (Foam and Powder) Dual System
- Lincoln Auto Greasing System.
- Additional E-Stops (emergency stop hand buttons)
RECENT REPAIRS AND REBUILD DETAILS:
- NEW Tier III C18 Caterpillar Engine, 500 Hours Since Installation
- NEW Radiator
- NEW Coupling Between Engine and Compressor
- NEW Idlers x 2
- NEW Separator
SHIPPNG WEIGHTS & DIMENSIONS:
- Mast assembly length 13,72 m (45’ 0”)
- Mast assembly width 2,13 m (7’ 0”) with inside loader
- Mast assembly height 1,83 m (6’ 0”)
- Mast assembly weight 9 979 kg (22 000 lb)
- Base/frame length 8,64 m (28’ 4”)
- Base/frame width 3,91 m (12’ 10”)
- Base/frame height 3,78 m (12’ 5”)
- Base/frame weight (std) 23 587 kg (52 000 lb)
- Most other features and details as per the attached Manufactures Specifications.
Inspections and Purchase Terms: Please contact us for additional details, photos and pricing.
Consistently maintained and repaired as necessary, this Drill Rig is in excellent ready to work condition.
Upon purchase, it will be completely cleaned, serviced and prepared for shipping.


globe